Type L67 has been designed to allow the upright to pivot in angle between 45° to 60°. This fitting should only be the barrel, providing an angular displacement from 3° up to subjected to light loads which cannot be positioned at 90° to a maximum of 11°, measured from the vertical. Ideal to the applied loads. For greater loads or other tube sizes, a type secure balustrade and guardrail systems on access ramps L62 flange is used and the upright bent to the required angle. Or other types of slopes . Ø indicates the diameter of the fixing Ø indicates the diameter of the fixing hole.
|Model||Measurements (in.)||Weight (lbs.)|
|Model||Measurements (mm)||Weight (kgs)|
References A, B, C refer to the Outer Diameter of the pipe that fits inside the fitting.
Pipe Size Chart
The chart below will help you understand how to match the size of fittings and pipe.
|Dimensional Weight (kgs)||0.5800|
|Loads||A Kee Lite component (size 6 to 9) can support an axial load of 800Kg. per set screw with the set screw tightened to a torque of 39Nm (rating includes a safety factor of 2:1)|
|Set Screw||Case hardened steel, Kee Koat corrosion resistant coating|
|Alt. Mfgr. Model Number||4UJ16|