Product Description
Similar to a Type L62, but used to set up the upright at an angle between 45° to 60°. This fitting should only be subjected to light loads which cannot be positioned at 90° to the applied loads. For greater loads or other tube sizes, a type L62 flange is used and the upright bent to the required angle. Ø indicates the diameter of the fixing hole.
Technical Data
Imagery
![L63 [tech]](https://simplifiedbuilding.co.uk/media/catalog/product/cache/4/thumbnail/130x/9df78eab33525d08d6e5fb8d27136e95/l/6/l63_-_gold_1_1.jpg "L63 [tech]")
![L63 Drawing [tech]](https://simplifiedbuilding.co.uk/media/catalog/product/cache/4/thumbnail/130x/9df78eab33525d08d6e5fb8d27136e95/l/6/l63-8_rev_c-page-001_2_1.jpg "L63 Drawing [tech]")
| Model | Measurements (in.) | Weight (lbs.) |
|---|---|---|
| L63-7 |
| Model | Measurements (mm) | Weight (kgs) |
|---|---|---|
| L63-7 |
References A, B, C refer to the Outer Diameter of the pipe that fits inside the fitting.
Pipe Size Chart
The chart below will help you understand how to match the size of fittings and pipe.
Additional Information
| Dimensional Weight (kgs) | 0.7200 |
|---|---|
| Manufacturer | Kee Safety |
| Brand | Kee Lite |
| Material | Aluminium |
| Fitting Function | Flange |
| Loads | A Kee Lite component (size 6 to 9) can support an axial load of 800Kg. per set screw with the set screw tightened to a torque of 39Nm (rating includes a safety factor of 2:1) |
| Set Screw | Case hardened steel, Kee Koat corrosion resistant coating |
| Standards | Not Applicable |
| Alt. Mfgr. Model Number | 4UJ16 |
