L25-9 - Three Socket Tee, 51mm (2")

ex VAT £39.40 inc VAT £47.28
plus minus
Model: L25-9

Product Description

Most commonly used as the 90° joint between the top rail and an intermediate upright on safety railing. As there are two socket set screws in the sleeve, this fitting can be used where a join is required in the horizontal tube. The Type 10 fitting can be used as an alternative when a join in the tube is not required.

Technical Data

Show in Imperial Show in Metric
Imagery
L25 [tech]
L25 Drawing [tech]
Model Measurements (in.) Weight (lbs.)
ADEFG
L25-92.383.542.913.077.091.81
Model Measurements (mm) Weight (kgs)
ADEFG
L25-950.0090.0074.0078.00180.000.82
References A, B, C refer to the Outer Diameter of the pipe that fits inside the fitting.

Pipe Size Chart

The chart below will help you understand how to match the size of fittings and pipe.

Pipe Fittings Size Chart

Additional Information

Dimensional Weight (kgs) 0.8200
Actual Weight (kgs) 0.82
Manufacturer Kee Safety
Brand Kee Lite
Material Aluminium
Loads A Kee Lite component (size 6 to 9) can support an axial load of 800Kg. per set screw with the set screw tightened to a torque of 39Nm (rating includes a safety factor of 2:1)
Set Screw Case hardened steel, Kee Koat corrosion resistant coating
Standards Not Applicable
Shopping Basket