L10-8 - Single Socket Tee, 40mm (1-1/2")

ex VAT £11.84 inc VAT £14.21
plus minus
Model: L10-8

Product Description

Designed to give a 90 degree butt joint between two tubes. Frequently used for the joint between end uprights and middle rail where the railing site is straight and level. Also used for base ties on racking. This fitting cannot be used where the tube passing through the sleeve is required to be jointed within the fitting.

Technical Data

Show in Imperial Show in Metric
Imagery
L10 [tech]
L10 Drawing [tech]
Model Measurements (in.) Weight (lbs.)
ADEF
L10-81.902.912.362.760.66
Model Measurements (mm) Weight (kgs)
ADEF
L10-840.0074.0060.0070.000.30
References A, B, C refer to the Outer Diameter of the pipe that fits inside the fitting.

Pipe Size Chart

The chart below will help you understand how to match the size of fittings and pipe.

Pipe Fittings Size Chart

Additional Information

Dimensional Weight (kgs) 0.3000
Actual Weight (kgs) 0.3
Manufacturer Kee Safety
Brand Kee Lite
Material Aluminium
Loads A Kee Lite component (size 6 to 9) can support an axial load of 800Kg. per set screw with the set screw tightened to a torque of 39Nm (rating includes a safety factor of 2:1)
Set Screw Case hardened steel, Kee Koat corrosion resistant coating
Standards Not Applicable
Alt. Mfgr. Model Number 4UJ19
Shopping Basket

Show Pricing

Option available in footer.