This fitting performs the same function as either Type 21 or Type 26, but because of its unique "Hinge and Pin" system, it can be added to an existing tubular assembly. Type A21/26 fittings are supplied and priced as a kit including 2 castings and 2 taper pins, which can be assembled in either configuration.
|Model||Measurements (in.)||Weight (lbs.)|
|Model||Measurements (mm)||Weight (kgs)|
References A, B, C refer to the Outer Diameter of the pipe that fits inside the fitting.
Pipe Size Chart
The chart below will help you understand how to match the size of fittings and pipe.
Click (hold mouse button down) and Drag to rotate the three dimensional image.
|Fitting Function||Add-On, Cross, Elbow, Railing, Tee / Socket|
|Loads||A Kee Klamp component (size 5 to 9) can support an axial load of 2000 lbs. per set screw with the set screw tightened to a torque of 29 lbs/ft. (rating includes a safety factor of 2:1)|
|Set Screw||Case hardened steel, Kee Koat corrosion resistant coating|
|Standards||ASTM A47-77-32510, BS EN ISO 1461|