Used to join the middle rail to an end upright on a guardrail on a slope from 0° to 11°. This fitting cannot be used to join the tube within the fitting. Used for base or bottom fall protection (40mm (1-1/2")) railing in DDA compliant railings. Use with Type 89-8.
|Model||Measurements (in.)||Weight (lbs.)|
|Model||Measurements (mm)||Weight (kgs)|
References A, B, C refer to the Outer Diameter of the pipe that fits inside the fitting.
Pipe Size Chart
The chart below will help you understand how to match the size of fittings and pipe.
|Fitting Function||Angled, Railing, Tee / Socket|
|Loads||A Kee Klamp component (size 5 to 9) can support an axial load of 2000 lbs. per set screw with the set screw tightened to a torque of 29 lbs/ft. (rating includes a safety factor of 2:1)|
|Set Screw||Case hardened steel, Kee Koat corrosion resistant coating|
|Standards||ASTM A47-77-32510, BS EN ISO 1461|