- Compatible with Kee Klamp pipe fittings
- Suitable for use with galvanised handrail fittings
- Quick to install—no special tools required
Product Description
Kee Klamp 84-5 – Malleable Plug (26.9mm O/D)
The Kee Klamp 84-5 is a simple malleable plug used to cap the end of open tube in Kee Klamp structures. Designed for use with 26.9mm outside diameter Schedule 40 steel tube, this fitting provides a clean, finished look while helping to keep out dirt and moisture.
Ideal for projects using Kee Klamp fittings, this plug is commonly used in handrails, guardrails, and general pipe fitting assemblies where unused tube ends need to be securely closed off.
Technical Data
Imagery
![84 [tech]](https://simplifiedbuilding.co.uk/media/catalog/product/cache/4/thumbnail/130x/9df78eab33525d08d6e5fb8d27136e95/i/m/image_644.jpg "84 [tech]")
![84 [tech]](https://simplifiedbuilding.co.uk/media/catalog/product/cache/4/thumbnail/130x/9df78eab33525d08d6e5fb8d27136e95/i/m/image_644_1.jpg "84 [tech]")
| Model | Measurements (in.) | Weight (lbs.) | |||
|---|---|---|---|---|---|
| A | D | E | F | ||
| 84-5 | 1.05 | 1.06 | 0.75 | 0.87 | 0.11 |
| Model | Measurements (mm) | Weight (kgs) | |||
|---|---|---|---|---|---|
| A | D | E | F | ||
| 84-5 | 20.00 | 27.00 | 19.00 | 22.20 | 0.05 |
References A, B, C refer to the Outer Diameter of the pipe that fits inside the fitting.
Pipe Size Chart
The chart below will help you understand how to match the size of fittings and pipe.
3D Model
Click (hold mouse button down) and Drag to rotate the three dimensional image.
Additional Information
| Dimensional Weight (kgs) | 0.0500 |
|---|---|
| Actual Weight (kgs) | 0.05 |
| Manufacturer | Kee Safety |
| Brand | Kee Klamp |
| Material | Ductile Iron to BS EN 1563 |
| Loads | A Kee Klamp component (size 5 to 9) can support an axial load of 2000 lbs. per set screw with the set screw tightened to a torque of 29 lbs/ft. (rating includes a safety factor of 2:1) |
| Set Screw | Case hardened steel, Kee Koat corrosion resistant coating |
| Standards | ASTM A47-77-32510, BS EN ISO 1461 |
