Double clips for attaching wiremesh infilling. It is possible to use Type 82 clips without the safety attachment, to secure various types of infill panels (banners, Plexiglass™ etc.) up to a thickness of 9.5mm (3/8"). This fitting is supplied with the following hardware: two M6x30mm hex head bolts, and two M6 hex head nuts. Stainless steel finish.
|Model||Measurements (in.)||Weight (lbs.)|
|Model||Measurements (mm)||Weight (kgs)|
References A, B, C refer to the Outer Diameter of the pipe that fits inside the fitting.
Pipe Size Chart
The chart below will help you understand how to match the size of fittings and pipe.
|Loads||A Kee Klamp component (size 5 to 9) can support an axial load of 2000 lbs. per set screw with the set screw tightened to a torque of 29 lbs/ft. (rating includes a safety factor of 2:1)|
|Set Screw||Case hardened steel, Kee Koat corrosion resistant coating|
|Standards||ASTM A47-77-32510, BS EN ISO 1461|