45-87 - Crossover, 40mm (1-1/2")x32mm (1-1/4")

ex VAT £9.32 inc VAT £11.18
plus minus
Model: 45-87

Product Description

Designed to give a 90° offset crossover joint. Frequently used on safety railing, where, to reduce cost by minimizing the tube cuts, a continuous horizontal rail is used. Designed to give a 90 degree offset crossover joint. Frequently used on safety railing utilising a continuous horizontal rail, minimising tube cuts to reduce costs. Type L45 may also be used to allow intermediate levels on racks. Note: Tube cannot be joined within this fitting. It may be also used to give intermediate

Technical Data

Show in Imperial Show in Metric
Imagery
45 [tech]
45 [tech]
45 [tech]
Model Measurements (in.) Weight (lbs.)
ABDEF
45-871.901.662.012.001.811.20
Model Measurements (mm) Weight (kgs)
ABDEF
45-8740.0032.0051.0051.0046.000.55
References A, B, C refer to the Outer Diameter of the pipe that fits inside the fitting.

Pipe Size Chart

The chart below will help you understand how to match the size of fittings and pipe.

Pipe Fittings Size Chart

Additional Information

Dimensional Weight (kgs) 0.6200
Actual Weight (kgs) 0.62
Manufacturer Kee Safety
Brand Kee Klamp
Material Ductile Iron to BS EN 1563
Fitting Function Crossover
Loads A Kee Klamp component (size 5 to 9) can support an axial load of 2000 lbs. per set screw with the set screw tightened to a torque of 29 lbs/ft. (rating includes a safety factor of 2:1)
Set Screw Case hardened steel, Kee Koat corrosion resistant coating
Standards ASTM A47-77-32510, BS EN ISO 1461
Shopping Basket