Most commonly used as the 90° joint between the top rail and an intermediate upright on safety railing.
As there are two socket set screws in the sleeve, this fitting can be used where a join is required in the horizontal tube.
The Type 10 fitting can be used as an alternative when a join in the tube is not required.
|Model||Measurements (in.)||Weight (lbs.)|
|Model||Measurements (mm)||Weight (kgs)|
Pipe Size Chart
The chart below will help you understand how to match the size of fittings and pipe.
|Fitting Function||Cross, Railing, Tee / Socket|
|Loads||A Kee Klamp component (size 5 to 9) can support an axial load of 2000 lbs. per set screw with the set screw tightened to a torque of 29 lbs/ft. (rating includes a safety factor of 2:1)|
|Set Screw||Case hardened steel, Kee Koat corrosion resistant coating|
|Standards||ASTM A47-77-32510, BS EN ISO 1461|