Product Description
Kee Klamp 10 - Single Socket Tee is designed to give a 90 degree butt joint between two tubes.
Frequently used for the joint between uprights and the middle rail on guardrailing where the railing site is straight and level.
Also used for base ties on racking.
This fitting cannot be used where the tubing within the sleeve is required to be joined within the fitting.
Type 25 should be used when a join in the tube is necessary.
Technical Data
Imagery
![10 [tech]](https://simplifiedbuilding.co.uk/media/catalog/product/cache/4/thumbnail/130x/9df78eab33525d08d6e5fb8d27136e95/k/k/kk_10_2_1_1.jpg "10 [tech]")
![10 [tech]](https://simplifiedbuilding.co.uk/media/catalog/product/cache/4/thumbnail/130x/9df78eab33525d08d6e5fb8d27136e95/i/m/image_1_1.jpg "10 [tech]")
| Model | Measurements (in.) | Weight (lbs.) | |||
|---|---|---|---|---|---|
| A | B | D | E | ||
| 10-4 | 0.84 | 0.87 | 1.36 | 1.20 | 0.29 |
| 10-5 | 1.05 | 1.05 | 1.63 | 1.47 | 0.51 |
| 10-6 | 1.32 | 1.32 | 1.81 | 1.84 | 0.64 |
| 10-7 | 1.66 | 1.66 | 2.38 | 2.16 | 0.99 |
| 10-8 | 1.90 | 1.90 | 2.69 | 2.38 | 1.28 |
| 10-9 | 2.38 | 2.38 | 3.31 | 2.88 | 2.14 |
| 10-65 | 1.32 | 1.05 | 1.75 | 1.46 | 0.55 |
| 10-67 | 1.32 | 1.66 | 2.16 | 2.16 | 0.95 |
| 10-75 | 1.66 | 1.05 | 2.25 | 1.46 | 0.71 |
| 10-76 | 1.66 | 1.32 | 2.25 | 1.81 | 0.95 |
| 10-78 | 1.66 | 1.90 | 2.88 | 2.38 | 1.39 |
| 10-87 | 1.90 | 1.66 | 2.47 | 2.16 | 1.10 |
| 10-98 | 2.38 | 1.90 | 2.94 | 2.52 | 1.43 |
| Model | Measurements (mm) | Weight (kgs) | |||
|---|---|---|---|---|---|
| A | B | D | E | ||
| 10-4 | 15.00 | 15.00 | 34.00 | 37.00 | 0.13 |
| 10-5 | 20.00 | 20.00 | 41.00 | 37.00 | 0.23 |
| 10-6 | 25.00 | 25.00 | 46.00 | 47.00 | 0.29 |
| 10-7 | 32.00 | 32.00 | 60.00 | 55.00 | 0.45 |
| 10-8 | 40.00 | 40.00 | 68.00 | 60.00 | 0.62 |
| 10-9 | 50.00 | 50.00 | 84.00 | 73.00 | 0.97 |
| 10-65 | 25.00 | 20.00 | 44.00 | 37.00 | 0.25 |
| 10-67 | 25.00 | 32.00 | 55.00 | 55.00 | 0.43 |
| 10-75 | 32.00 | 20.00 | 57.00 | 37.00 | 0.32 |
| 10-76 | 32.00 | 25.00 | 57.00 | 46.00 | 0.43 |
| 10-78 | 32.00 | 40.00 | 73.00 | 60.00 | 0.63 |
| 10-87 | 40.00 | 32.00 | 63.00 | 55.00 | 0.50 |
| 10-98 | 50.00 | 40.00 | 74.00 | 64.00 | 0.65 |
References A, B, C refer to the Outer Diameter of the pipe that fits inside the fitting.
Pipe Size Chart
The chart below will help you understand how to match the size of fittings and pipe.
Additional Information
| Brand | Kee Klamp |
|---|---|
| Material | Steel |
| Fitting Function | Cross, Railing, Swivel Socket, Tee / Socket |
| Loads | A Kee Klamp component (size 5 to 9) can support an axial load of 2000 lbs. per set screw with the set screw tightened to a torque of 29 lbs/ft. (rating includes a safety factor of 2:1) |
| Set Screw | Case hardened steel, Kee Koat corrosion resistant coating |
| Standards | ASTM A47-77-32510, BS EN ISO 1461 |
