10-78 - Single Socket Tee, 32mm (1-1/4") x 38mm (1-1/2")

ex VAT £10.25 inc VAT £12.30
plus minus
Model: 10-78

Product Description

Designed to give a 90 degree butt joint between two tubes. Frequently used for the joint between end uprights and middle rail where the railing site is straight and level. Also used for base ties on racking. This fitting cannot be used where the tube passing through the sleeve is required to be jointed within the fitting.

Technical Data

Show in Imperial Show in Metric
Imagery
10 [tech]
10 [tech]
10 [tech]
Model Measurements (in.) Weight (lbs.)
ABDE
10-781.661.902.882.381.39
Model Measurements (mm) Weight (kgs)
ABDE
10-7832.0040.0073.0060.000.63
References A, B, C refer to the Outer Diameter of the pipe that fits inside the fitting.

Pipe Size Chart

The chart below will help you understand how to match the size of fittings and pipe.

Pipe Fittings Size Chart

Additional Information

Dimensional Weight (kgs) 0.6300
Actual Weight (kgs) 0.63
Manufacturer Kee Safety
Brand Kee Klamp
Material Ductile Iron to BS EN 1563
Fitting Function Cross, Railing, Tee / Socket
Loads A Kee Klamp component (size 5 to 9) can support an axial load of 2000 lbs. per set screw with the set screw tightened to a torque of 29 lbs/ft. (rating includes a safety factor of 2:1).
Set Screw Case hardened steel, Kee Koat corrosion resistant coating
Standards ASTM A47-77-32510, BS EN ISO 1461
Shopping Basket

Show Pricing

Option available in footer.