Outdoor and indoor banner frames
Signs and banner adverts are everywhere: shops, garden centres, business premises, car parks, sport clubs, bars & restaurants, motorway service stations, schools and colleges to name a few. They may be a permanent fixture, required to be re-positioned or even taken away if being used for an event such as a sports day, fetes or weddings.
Kee clamp fittings and tube allows frames to be quickly and easily constructed, are long lasting, hard-wearing and allow frames to be easily configured to suit your signage, whether they are of flexible or rigid construction.
We collected together a number of sign frames we’ve seen out and about to give you some ideas.
Gastro Pub Specials Board
This great idea was spotted while enjoying a meal out, using a roll of Kraft paper the ‘specials’ are displayed on this easy to update sign frame.
Parts you'll need
Made with 33.7 diameter galvanised tube and fittings it gives a stylish industrial looking finish:
Tube
- 2 x Cut 6-2-G Tube for depth, at required length
- 2 x Cut 6-2-G Tube for width, at required length
- 2 x Cut 6-2-G Tube for height, at required length
And
- 8 x 6mm suitable countersunk head wall fixings
Wall Mounted Banner Frame
The wall mounted sign banner frame typically consists of a simple square or rectangle. This is mounted to the wall using our Rail Support fittings, which go on any suitable surfaces including wood, brick and concrete.
The banner is attached by stringing bungee cords or cable ties through the grommets of the banner and then around the tubular framework.
Alternatively, a rigid vinyl or wooden sign can be fixed using a tabbed fitting and a nut and bolt assembly.
The result is a simple, long lasting solution that is cost effective and easy to assemble.
Parts you'll need
Tube
- 2 x Vertical tubes 7-3-A at required length
- 2 x Horizontal tubes 7-3-A at required length
And
- 8 x M12 fixings to suit mounting structure
Floor Fixed Sign frames
Galvanised steel Kee Klamp and tube enable sign frames to be made in almost any size and can be configured to include support legs to suit many conditions.
The uprights can be fixed using top fixed base plates and fixings or be cast in. Alternatively can be supplied with free-standing base feet to allow for re-position or where it is preferred not to fix permanently.
Free-standing Sign Display Frames
Ideal for indoor or outdoor applications, these display frames can be left in place permanently or easily broken down, moved and stored.
Available in both Aluminium and galvanised steel.
To make the sign frames on shown in the two outside photos in galvanised steel you’ll need:
Parts you'll need
Tube
- 2 x Cut 6-2-G Tube for depth, at required length
- 4 x Cut 6-2-G Tube for width, at required length
- 2 x Cut 6-2-G Tube for height, at required length
Need a sign?
Call us or send us your requirements and we would be pleased to provide a quote.
