An industrial tube bed made from Kee Klamp
Kee Klamp Bed
This Kee Klamp Bed, is an easy to assemble and dismantle system which looks stylish and very sturdy.
- 4 x 61-6 Flanges - Used as base flanges for the legs.
- 2 x 10-6 Tees - Connects the headboard.
- 4 x 15-6 Elbows - Used on the top of the headboard and footboard.
- 4 x 21-6 Side Outlet Tee - Used on the corners of the mattress frame.
- 2 x 6-2-G @ 1.9m – These are the horizontal supports.
- 2 x 6-2-G @ 1.6m - This is the headboard uprights.
- 5 x 6-2-G @ 1.4m – These are the width supports.
- 2 x 6-2-G @ 1.2m – These are the end post uprights.
This Design does not have a support for the mattress, we would strongly suggest including an extra support which would comprise of: