Handrail kit for stairs and landing: For fixed angles 30°- 45° (SRL-029)

As low as: ex VAT £122.74 inc VAT £147.29


Handrail height (C): approx 1m

Typically ships in

Price as configured: ex VAT £0.00 inc VAT £0.00

plus minus
Model: SRL-29uk

Product Description

SRL-29 will help you build a robust, long lasting handrail solution which ensures safe access to your house or garden. Suitable for stairs with an angle between 30° and 60°.

A sturdy handrail suitable for your stairs and landing

This kit will help you easily navigate the stairs and landing area leading to your home entrance. The system uses slip-on tube fittings that suit stair angles between 30° and 60°. Available in a silver colour.

stairs to landing steel handrail kit
stairs to landing handrail detail

Designed to last decades

The SRL-29 uses galvanised steel tube and fittings, making it one of the most durable railing systems on the market. Weatherproof and incredibly sturdy, it can last decades without any rusting or bending.

Incredibly easy to install

This handrail is one of our easiest rails to install. Using slip-on fittings, the system can be put together in less than 1 hour. Just use the allen key provided with the kit to tighten the fittings in place.

easy to use tube fitting for handrail
custom aluminium handrail for stairs

Not the handrail you are looking for?

Let our team help you design a rail that suits your requirements! We use galvanised steel or aluminium uprights to build sturdy rails that will help you gain access to your home or garden. Just get in touch with our team!

Kit contents

The SRL-29 handrail kit includes all the tube and fittings you require to put the rail together. An allen key is also included with the kit. Fixings (screws and bolt) are not provided.

Size 7 - 42.4 O/D Galvanised Tube
Size 7 - 42.4 O/D Galvanised Tube
Uprights height: 1m Qty: 3
Size 7 - 42.4 O/D Galvanised Tube
Size 7 - 42.4 O/D Galvanised Tube
Custom length grab rail Qty: 2
62-7 - Standard Railing Flange, 32mm (1-1/4")
62-7 - Standard Railing Flange, 32mm (1-1/4")
Qty: 3
29-7 - 30° to 60° Single Socket Tee, 32mm (1-1/4")
29-7 - 30° to 60° Single Socket Tee, 32mm (1-1/4")
Qty: 2
325-7 - Level to Sloping Down Tee (30° to 45°)
325-7 - Level to Sloping Down Tee (30° to 45°)
Qty: 1
84-7 - Malleable Plug, 32mm (1-1/4")
84-7 - Malleable Plug, 32mm (1-1/4")
Qty: 2

Useful Documents

Hardware to use - Recommendations

What you need to know

How do I measure correctly?

Remember what your Dad told you? 'Measure Twice, Cut Once' You know the the phrase!

Figuring out the measurements for your handrail requires some attention to detail. There are two ways to figure it out the dimension for your grab rail and how you do it probably depends on how much you like maths.

This simple way to do this is to have someone stand at the bottom of the steps holding the end of the measuring tape. Walk to the top of the stairs while each of you hold the measuring tape 1m off the ground. Record the length when you have positioned the ends where you want the rail to begin and end.

The mathematical way of calculating would be to measure the rise and run of the steps and then calculate the length of the railing by the following formula:

Railing Length = √ height2 + length2

The square root of the height squared plus the length squared will give you the proper length of your rail.

What sort of prepping do I need to do?

Whether you are mounting to the wall or to ground, be sure that the area is cleaned so that it can receive the base flange or railing bracket without obstruction.

How do I mount base flanges?

Anchoring to concrete or masonry

  • Align flange and mark holes - Set the base flanges where they need to go and mark the holes with a marker.
  • Dimple holes with a nail set - Before drilling, make a dent in the surface to prevent the drill bit from drifting.
  • Drill holes for the anchor - Use a hammer drill and the appropriate masonry bit to make a hole for the anchor. Follow the instructions for drilling the hole from the anchor manufacturer.
  • Remove dust from holes - Use a air hose or vaccum cleaner to get the debris out of the holes.
  • Attach flanges with anchors - How you will do this depends on anchor style. But if you use hammer-in anchors, then put a nut on the end of the threads to protect the threads while you hammer the anchor into place.
  • Cut off excess bolt - If you have excess bolt that is exposed after tightening the anchors, use a hack saw to remove the excess.

Anchoring to wood

  • Align flange - Set the base flanges where they need to go and mark the holes with a marker.
  • Drill pilot holes - Drill a pilot hole appropriate for the size lag screw that you are using.
  • Attach flange with screws - Use a socket set to screw the lag screw into place.

How do I mount wall railing brackets?

  • Align bracket and mark holes - Begin by placing the bracket against the wall and marking the holes.
  • Drill pilot holes - Drill a Pilot hole for the screws that will be used to attach the brackets. A hammer drill will be required if you are drilling into concrete or masonry.
  • Attach brackets to wall - Attach the brackets with the appropriate kind of screw for the material that you are anchoring into.

How do I attach the uprights?

In most cases this is as simple as slipping the upright into the base flange and tightening the set screws in the fittings. Use a level to ensure that the post is plumb.

How do I attach brackets to the uprights?

This will be different for each kind of railing. The key here is not to attach the fitting too tightly. Attach the bracket or fitting just enough, so that adjustments can be made. You will probably not want to make your final tightening until after the railing has been attached.

How do I attach the railing to brackets?

When it comes to the differences in the handrail kits, attaching the rail to the handrail brackets is where there is the most diversity. Some railings will be much easier to attach than others.

  • Attaching directly to the fitting - Some railings were meant to slip through a hole in a fitting. If this is case, then the job is easy! Simply slip the tube through the hole in the fitting and tighten down the set screw.
  • Drilling into tube - Some railing brackets are designed to connect to the tube with screws. If this is the case, then make pilot holes with a drill before attempting to screw into the tube. Even if your screws are "self-drilling" we recommend making a pilot hole. Pilot holes can be made by aligning the grab rail on the brackets and using a marker to mark each hole. Once the hole is marked, take the railing off the brackets and pre-drill the holes in a stable location. After you have made the pilot holes, set the railing on the brackets and attach with the appropriate screws.

How do I tap in the tube caps?

Once your entire handrail is assembled, you'll want to tap the tube caps into any exposed ends of the rails and posts. It is best to do this with a rubber mallet. If you don't have a rubber mallet, then cover the cap with a piece of cardboard to protect the metal from scratches while you tap it in with a standard hammer.

Additional Information

Dimensional Weight (kgs) N/A
Installation Difficulty Easiest - No tube cutting or tube drilling required.
Handrail Type Slip-On - Fittings wrap around grab rail.
Rali End Open Ended
Mounting angle Standard Stair Angles (30-60 degrees)
Tube Drilling Required? No
Tube Cutting Required? No
Mounting Style Base Flange
Metal Steel
Shopping Basket

Show Pricing

Option available in footer.