Grating Clips and Floor Fix

Grating Clips

The Grating Clip by BeamClamp® is a cost effective method of securing steel grating to existing structural steel members.

Clamping the grating eliminates costly and time consuming welding and drilling. No access below the grating is required, resulting in a quick and simple installation.

The Grating Clip can be installed with a flat head screwdriver and can be easily removed allowing the grating to be re-positioned or removed for maintenance purposes.

The Grating Clip will suit grating bar widths from 30mm to 41mm and grating bar depths up to 50mm deep to ensure that most standard grating sections can be accommodated.

Grate Fix

The GrateFix fastener is a simple method of securely fastening steel, aluminium and fiberglass grating to supporting steelwork.

Using only a hexagon key to install, grating can be secured without welding or drilling.
The GrateFix fastener is designed to be installed from above the grating by one person. No access below the grating is required resulting in a quick and simple installation.
The GrateFix fastener consists of a stepped malleable iron or stainless steel bottom casting complete with screw and saddle clip bracket. All items are available galvanised or in grade 304 stainless steel.

In addition to the standard symmetrical bracket for aluminum and fibreglass grating, the stainless steel Grate Fix fastener can be supplied with alternative bracket styles to suit varying bearing bar widths.

FloorFix and FloorFix HT

FloorFix is designed to fix flooring plate to supporting steelwork from the topside only without the need for time consuming on site drilling, tapping, bolting or welding. It works on a cam mechanism that can be operated using a basic hexagon key drive.

FloorFix HT (high tolerance) is so named because it allows steel erectors a high degree of tolerance, it retains all the benefits of our widely renowned original design but is far more user friendly. It allows for floor plates to be fixed to new steelwork that is erected within +/- 6mm of its intended position. It is capable of fixing to steel flanges from 3 to 25mm without the need for additional packing pieces