Beam Clamp

Beam Clamp

A no-welding clamping system for
steel to steel connections


Examples of BeamClamp in use

Lifting support for bridge rehab
Lifting support for bridge rehab
A French bridge rehab project needed to connect I-beams together temporarily without deforming the permanent beams with welding. BeamClamp became the perfect engineered connection system.
Offset connections for I-Beams
Offset connections for I-Beams
Connecting I-beams that are offset from one another can be difficult. This is often needed in the manufacturing and refinery industries. BeamClamp can be used to bridge the gap between I-beam connections.
Currently Shopping by
  1. Bolt Diameter: 16mm

Configuration

This is an example of a typical BeamClamp® assembly used to connect two steel sections together.

The assembly consists of a pre-drilled location plate [4] inserted between the two steel sections. An upper set of BeamClamp® components [2] clamp down on the lower flange of the upper beam while a lower set of components [5] work in the opposite direction, clamping the underside of the upper flange of the lower member. Additional packing shims [3] may be used to adjust the clamp to the thickness of the flange being connected. The connection is secured by inserting a bolt [1] through each of the lower clamps, the location plate, the upper clamps and then tightening a nut to the recommended torque.

1 = SAE Grade 5 bolt, nut and flat washer
2 = BA, BB, BT, or BW; BE1 or BE2 or BK1
3 = BH1, BF1, BG1, BF2 or BG2
4 = Location plate
5 = BA, BB, BT, or BW; BE1 or BE2 or BK1

BeamClamp Installation

Download our steel connections catalogue

Steel Connections Catalogue

All of the important details about steel connection solutions in a print-friendly format. The catalogue contains technical data, installation tips, and a detailed cost analysis.

Download the catalogue

Our team is here to help

Test

Our experts will help you select the items you need to complete the project.


Shopping Basket

Show Pricing

Option available in footer.